Before Every Treatment - Beurer tria LAS100 Instructions D'utilisation

NOTE: To prevent damage to your Tria Laser,
use only the included Tria battery charger. If you
lose the charger, please contact Customer Service.
NOTE: You may charge the laser in Quiet mode
(charges without the sound of cooling fan), but
it will take longer. To change charging modes,
press and hold the power button while charging
until you hear a tone.
TEST THE LASER ON A PATCH OF SKIN
Before your first full treatment on a new area
of your body, we recommend you test the Tria
Laser on a patch of skin there and try different
energy levels.
1. Prepare your skin and unlock the Tria Laser (see
page 10). The Tria Laser will be set
to Level 1 (low).
2.
Place the treatment window flat against your
skin, and test one laser pulse.
3.
If Level 1 was tolerable for you, then move to
another test area and increase to Level 2, testing
a patch at that level with one laser pulse. To adjust
the Tria Laser setting up or down, press the power
button (see page 11).
4.
If Level 2 was tolerable for you, change test
locations and increase by one level until you find
the highest setting that is still tolerable. Treating
at the highest level possible will maximise results.
5. Wait 24 hours and then examine the test areas.
If the skin appears normal, start your first treatment
at the highest level you are comfortable using.
Retest your skin if your skin tone changes
dramatically (due to tanning).
If you notice blistering, burns, changes in
your skin tone or any other side effects, or if
you are not sure about the outcome of the test,
DO NOT USE your Tria Laser. Contact Customer
Service or your doctor.

BEFORE EVERY TREATMENT

PREPARE YOUR SKIN
1. Cleanse the treatment area, removing all
cosmetics, lotions and creams that may block
the laser light.
2. Shave the treatment area. This removes the
surface hair, which improves comfort and allows
the light to better reach the hair in the follicle.
3. Dry the treatment area.
1.
2.
Tria Beauty 10
GB
UNLO
The Tr
unlock
helps c
for you
Unplug
and pr
it on. T
sensor
Hold t
the Tria
wish to
sense
is safe
a serie
11