Beurer tria LAS100 Instructions D'utilisation page 14

ting UNLOCK THE LASER
sults. The Tria Laser will lock when it's not in use. To
unlock the Tria Laser, use the skin sensor, which
eas. helps confirm that the Tria laser is safe
tment for your skin tone. To unlock:
ng.
1. Unplug the Tria Laser from the battery charger
and press the power button to turn
it on. The display will show the lock and skin
sensor icons.
in
2.
f Hold the skin sensor (red light at the base of
test, the Tria Laser) against the skin in the area you
er wish to treat. The skin sensor will automatically
sense and check your skin. If the Tria Laser
is safe for your skin tone, the Tria Laser will emit
a series of beeps and unlock.
ck
e
lows
cle.
eauty 10 11
3. If the lock icon is still visible and you do not hear
a series of beeps, then it may not be safe for you
to use the Tria Laser. Or, you may be using the
skin sensor incorrectly and need to try again. To
try again, lift the skin sensor from your skin and
follow Steps 1 and 2 above. If you still cannot
unlock the Tria Laser, please contact Customer
Service for assistance.
SET THE TREATMENT LEVEL
The Tria Laser has different energy levels.
In a clinical study, higher levels were found to
be 2-3 times more effective. So for best results,
we recommend you use the highest setting
that you can tolerate.
When the Tria Laser is on and unlocked, press the
power button to select your desired level. Each
time you press the power button, the level will
increase. Once the Tria Laser is at the maximum
1 2 3 4 5
level, pressing the power button again
will return it to the lowest level.