Doubleshot And Tripleshot; Dispensing A Coffee Beverage With Milk - Siemens EQ.700 integral Manuel D'utilisation

en operation
Notes
¡ With a number of settings your cof-
fee is prepared in several steps.
Wait until the process is fully com-
pleted.
¡ If you are dispensing a beverage
with milk, always connect the milk
container filled with milk or the
milk adapter to a milk carton.
¡ You can only connect the milk con-
tainer or milk adapter if the milk
system is fitted with the adapter
and the hose in the beverage out-
let cover.
¡ The milk container is specially de-
signed for this appliance. Only use
the milk container for storing milk
in the refrigerator and in the
house.
¡ If the milk system has not been
cleaned, small amounts of milk
may escape when hot water is dis-
pensed.
7.3 doubleShot and tripleShot
Your appliance grinds the coffee two
or three times.
To ensure that only pleasant-tasting
and easily digestible aromatic sub-
stances are released, coffee beans
are freshly ground and brewed again
by the appliance.
The longer coffee brews, the more
bitter substances and undesirable
aromas are released. These bitter
substances and undesirable aromas
affect the taste and digestibility of
coffee.
Note: The functions "doubleShot" and
"tripleShot" depend on the beverage
strength and beverage size selected.
7.4 Dispensing a coffee
beverage with milk
An example explains how to make a
latte macchiato.
48
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
Never touch the milk system when
▶
it is hot.
Allow the hot milk system to cool
▶
down before touching it.
Requirements
¡ The milk container or milk adapter
is connected.
¡ The milk container is filled with
milk or the milk adapter hose is
immersed in milk.
Place a glass underneath the
1.
beverage outlet.
Press "Classics".
2.
Select and press the beverage
3.
symbol for latte macchiato.
To change the strength, press ⁠ .
‒
To change the per-cup quantity,
‒
press ⁠ .
To change the milk ratio, press
‒
⁠ .
Press "Start" and wait until the pro-
4.
cess is complete.
To completely stop dispensing
‒
the beverage, press "Stop".
To only stop the current dis-
‒
pensing step, press "Skip".
After preparing the beverage, the
milk system will automatically
clean itself with a short jet of
steam.
Notes
¡ If you do not change any settings
for approx. 30 seconds, the appli-
ance will exit settings mode.