CAME ZLJ14 Manuel D'installation page 31

[ENCODER]
[Sensibility]
[Travel sens]
[Slw Dwnsens]
[Enc Slow Down]
[Opn Slw Dwn]
[Cls SlwDwn]
[CClose Accel]
[OpenAccel]
[Travel calibr]
SET TIMES
[ACT]
[PartialACT]
[Cycle time]
[Preflash time]
[Lock time]
[Ram jolt time]
[Partial open]
[Courtesy Time]
[USERS]
[Add User] (250 max)
[Change Name]
[Change Code]
[Assoc Function]
[Delete user]
[Delete ALL]
[Save memory]
[Load memory]
[INFO]
[MOTORS TEST]
 IMPORTANT! Start programming by performing the first function, that is, [MOTOR TYPE], [TOTAL STOP] and [TRAVEL
CALIBR]
.
Language menu
[LANGUAGE]
[Italiano] / [English] / [Français] / [Deutsch] / [Español] / [Portugues euro] / [Portugues bras]
Select one of the available languages
Functions menu
[FUNCTIONS]
[Auto Close]
The fi rst automatic-closing wait starts when the opening endstop point is reached and can be set to between 0 and 300 s. The automatic
closing does not turn on if any of the safety devices trigger when an obstruction is detected, after a total stop or during a power outage.
[Maint Action]
The leaf opens and closes by keeping a button pressed. Opening button on contact 2-3 and closing button on contact 2-4. All other control
devices, even radio-based ones, are excluded.
[Enabled] / [Disabled]
[ON] / [OFF]
[1%] ⇨ [40%]
[1%] ⇨ [40%]
[1%] ⇨ [15%]
[1%] ⇨ [15%]
[Confirm? (No)] / [Confirm? (Yes)]
[0 s] ⇨ [300 s]
[0 s] ⇨ [300 s]
[10 s] ⇨ [150 s]
[1 s] ⇨ [60 s]
[1 s] ⇨ [5 s]
[1 s] ⇨ [3 s]
[5 s] ⇨ [60 s]
[1 s] ⇨ [300 s]
[2-7] / [Open] / [B1-B2] / [2-3P] / [Disabled];
[Confirm? (No)] / [Confirm? (Yes)]
[Confirm? (No)] / [Confirm? (Yes)]
[Confirm? (No)] / [Confirm? (Yes)]
[Version] / [No. of travels] / [Start message] / [Reset system]
[OPEN =>]
[Disabled] / [Enabled]
[Disabled] / [Enabled] / [Closing]
Default
[Enabled]
[-⚫⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪◦+]
[-⚫⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪◦+]
[ON]
[10%]
[10%]
[15%]
[15%]
Default
[10 s]
[10 s]
[90 s]
[5 s]
[2 s]
[1 s]
[10 s]
[300 s]