Technical Specifications; Disposal - Beurer ELLE HTE 50 Mode D'emploi

Cleaning the straightening/crimping iron
[F/G]
• Slide the selector switch [11] into the
"Straighten" position [a].
• Press on the lever [3] to open the
straightening/crimping attachment [12].
• Use the fingers on your other hand to slide
the selector switch [11] into the "Crimp"
position [c]. Now the straightening/crimping
iron [F, G] is unlocked.
• Remove the straightening/crimping iron
[F, G] from the straightening/crimping
attachment [12].
8

Technical specifications

Weight
Power supply
Power consumption
Temperature range
Safety class
Ambient conditions
Allowable temperature range
Subject to technical modifications.
9

Disposal

In the interest of protecting the environment,
the unit must not be thrown out with the
household waste at the end of its service life.
Dispose of the unit at a suitable local
collection or recycling point.
Observe the local regulations for
material disposal.
Dispose of the unit in accordance with
EC Directive 2002/96/EC–WEEE (Waste
24
• Now the straightening/crimping iron [F, G]
can be cleaned, like the other attachments.
• Attach the straightening/crimping iron [F, G]
again after cleaning it. Attach it by following
the removal steps in reverse order.
Approx. 330 g
220 - 240 V ~, 50 Hz
25 W
125 to 160 °C
II
Only approved for indoor use
-10 to +40 °C
Electrical and Electronic Equipment).
If you have any questions, please contact the
local authorities responsible for waste
disposal.
You can find out about collection points for
your old units e.g. from the local municipal
government, the local waste disposal
company or your dealer.