Cleaning And Storing The Cleaner - Polaris 9300xi Sport Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Page 12
3
Figure 22. Remove Filter Assembly
Figure 23. Open Filter Assembly
Figure 24. Remove Filter Canister
Figure 25. Wash Filter Canister
7

5.2 Cleaning and Storing the Cleaner

The cleaner must be cleaned regularly using slightly
soapy clean water, do not use solvents such a trichloro-
ethylene or its equivalent. Rinse the cleaner generously
using clean water. Do not let your cleaner dry in direct
sunlight near the pool. The cleaner must be stored on its
own caddy, so that it dries quickly.
1.
Place the rear wheels on the caddy side wedges as
shown in Figure 26.
1
Figure 26. Position Cleaner on Caddy
2.
Roll the unit into place onto the caddy. Refer to
Figure 27.
NOTE The cleaner cable must be disconnected from
the control box before removing the cleaner from
the pool. Wrap the cleaner cable around the
hooks located at the rear of the caddy.
Figure 27. Roll Cleaner onto Place on the Caddy
2

Publicité

Table des Matières
loading

Table des Matières