Temperature Monitoring - Festool CT SYS HEPA Notice D'utilisation

English
Close dust extractor
Open dust extractor
Connect dust extractor to storage box
Before lifting, always close the T-Loc at
the dust extractor or connect to the stor­
age box and check for secure holding.
Max. load for connection to other Systainers:
44.09 lbs. (20 kg)
8.2 Use/Adjust carrying strap
Max. permissible load of carrying strap: 44.09
lbs. (20 kg)
The carrying strap can be attached in two dif­
ferent positions:
Carrying the dust extractor: Carrying strap
–
at dust extractor [4a]
4a
Carrying storage box with dust extractor:
–
Carrying strap at storage box [4b]
12
1
3
2
4b
click
Before lifting, check the carrying strap for
proper functionality and put T-loc at dust ex­
tractor into corresponding position.
Adjust the length of the carrying strap at the
adjusting tab [4c].
4c
8.3

Temperature monitoring

Before reaching a critical temperature, the
temperature monitor switches off the dust ex­
tractor.
click
1
2