NUK Flash Mode D'emploi page 50

portable and mobile RF communications equipment and the
The THixyz series is intended for use in an electromagnetic environment in which radiated
RF disturbances are controlled. The customer or the user of the THixyz series can help
prevent electromagnetic interference by maintaining a minimum distance between portable
and mobile RF communications equipment (transmitters) and the THixyz series as
recommended below, according to the maximum output power of the communications
equipment.
Rated maximum
output power of
transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter
in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range
applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
Recommended separation distances between
ME EQUIPMENT or ME SYSTEM
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d = 1,2
N/A
N/A
N/A
N/A
N/A
m
80 MHz to 800 MHz
d = 1,2
0,12
0,38
1,2
3,8
12
- 50 -
800 MHz to 2,5 GHz
d = 2,3
0,23
0,73
2,3
7,3
23