NUK Flash Mode D'emploi page 40

Memory
(25
datasets)
Switch
between
°C or °F
Silent
mode
OFF mode
With the device switched on, repeatedly press the
ON/MEM button to look at up to 25 previous
measurements. The memory is represented by the
symbol in the LCD display. This function is valid only
with forehead measurement.
Changing the temperature display from °C to °F:
if the device is in room temperature mode, press and
hold the SCAN button whilst simultaneously pressing
the ON/MEM button
On the LCD display, the characters switch from "°C" to
"°F" and vice versa.
With the device switched on, press the ON/MEM button
for 3 seconds. The silent mode symbol
flash on the LCD display. Silent mode is activated by
releasing the ON/MEM button.
Proceed in the same way to deactivate silent mode.
Note With silent mode activated, none of the
signal beeps described will be heard.
To switch off the thermometer, press and hold the
ON/MEM key until "OFF" appears in the LCD
display. This process may take 8 - 10 seconds.
- 40 -
for 3 seconds.
starts to