Technical Data - AEG FAVORIT 65402 I Notice D'utilisation

44

Technical data

Problem
The dishes are wet.
The dishes are wet and matt.
Activating the rinse aid dispenser
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold button Delayand button Start at the same time until the programme
indicators AUTO, PRO and 30MIN flash.
4. Release button Delayand button Start.
5. Press button Option.
• The programme indicators AUTO and 30MIN go off.
• The programme indicator PRO continues to flash.
• The display shows the setting of the rinse aid dispenser.
6. Press button Option to change the setting.
7. Deactivate the appliance to confirm
TECHNICAL DATA
Dimensions
Electrical connection
Water supply pressure
Water supply
The detergent can be the
cause.
The washing programme was
without a drying phase or with
a decreased drying phase.
The rinse aid dispenser is emp-
ty.
The multitab function is on
(this function automatically
deactivates the rinse aid dis-
penser).
Width
Height
Depth
Voltage
Overall power
Fuse
Frequency
min.
max.
1) Cold water or hot water
Possible cause
The rinse aid dispenser is off.
The rinse aid dispenser is on.
Possible solution
Use a different brand of deter-
gent.
For better drying results, keep
the door ajar for some minutes.
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispenser.
818 - 898 mm
220-240 V
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
max. 60 °C
446 mm
575 mm
2100 W
10 A
50 Hz