Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Fault
The "cool-fresh"
compartment is too warm or
too cold.

Customer service

Your local customer service
can be found in the telephone directory
or in the customer-service index. Please
provide customer service
with the appliance product number
(E-Nr.) and production number (FD).
These specifications
can be found on the rating plate. Fig. -
To prevent unnecessary call-outs, please
assist customer service by quoting
the product and production numbers.
This will save you additional costs.
Possible cause
The standard setting has
been set too high or too low
(e.g. if there is frost
in the "cool-fresh"
compartment).
Remedial action
The temperature in the "cool-fresh"
compartment can be set to be 2 steps warmer
and/or colder, Fig. ". If the refrigerator
compartment temperature is set to 4,
the "cool-fresh" compartment has
a temperature of almost 0 °C.
1. Press super button on refrigerator
compartment 2 for 3 seconds until a signal
sounds.
Temperature display on refrigerator
compartment 4 flickers.
2. Change the setting using the temperature
setting button on refrigerator
compartment 3.
Setting 2 – coldest setting
Setting 8 – warmest setting
The set temperature is saved after one
minute.
Repair order and advice
on faults
Contact information for all countries can
be found on the enclosed customer
service list.
GB
0344 892 8979
IE
01450 2655
US
800 944 2904
en
Calls charged at
local or mobile rate.
0.03 € per minute
at peak. Off peak
0.0088 € per
minute.
toll-free
35

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kif42 série

Table des Matières