External Component Operations; Using Auxiliary Players; Using A Subwoofer; (Only For Ks-Fx940R) - JVC KS-FX940R Manuel D'instructions

EXTERNAL COMPONENT OPERATIONS

Using auxiliary players

After connecting an external component to the auxiliary input jack on the front panel, you can
select the component as the sound source.
1
AUX
CD-
CH
Note:
When selecting an external component as the source, what appears on the upper part of the
display depends on the "AUX" setting (see page 32).
Note on One-Touch Operation:
When you press CD-CH/AUX, the power automatically comes on. You do not have to press
to turn on the power.
2
Operate the external component.
• Refer to the instructions supplied with your external component.

Using a subwoofer

This section is ONLY FOR KS-FX940R.
By connecting a subwoofer with the SUB WOOFER cord on the rear, enhanced bass sound
can add a more realistic, theater atmosphere to your stereo system.
• Refer also to the instructions supplied with your subwoofer.
To select the frequency cutoff point, refer to "Selecting the frequency cutoff point" on page 32.
To adjust the subwoofer volume, refer to "Adjusting the sound" on page 23.
Auxiliary input
1
Select the external component.
Each time you press the button, you can select the CD
automatic changer and the external component alternately.
MD player etc.
Note:
Use a stereo mini-plug cord to connect
an external component to the unit.
39