Using The Blind; Cleaning And Maintenance - Dometic Rastrollo 3000 Instructions De Montage Et De Service

Using the blind

Fitting the guide rails (fig. 5, page 5 to fig. 6, page 5)
➤ Calculate the length of the guide rails (fig. 5, page 5).
➤ Saw both guide rails off square and to equal lengths.
➤ Fasten the guide rails (fig. 6, page 5):
– Push the guide rail onto the holder on the cassette.
– Align the guide rail at right angles to the cassette.
– Fix the guide rail.
4 Using the blind
Closing the blind
NOTE
I
To close the flyscreen blind, you must pull it all the way down and
hook it in at the bottom position. The blackout blind can also be
locked in the intermediate positions.
➤ Pull the handle of the flyscreen down and hook it in by pressing it lightly
against the wall.
➤ Pull the handle of the blackout down and lock it into the required position
by pressing it lightly against the wall.
Opening the blind
➤ Pull the handle of the blind down a little and away from the wall, and then
guide it slowly up.
5

Cleaning and maintenance

NOTICE!
A
Do not use sharp or hard objects or cleaning agents for cleaning as
these may damage the product.
➤ Occasionally clean the product with a damp cloth.
➤ To prevent material fatigue, do not keep the blind closed for a long period
of time.
12
Rastrollo 3000
EN