Troubleshooting - SEVERIN piccola Mode D'emploi

9. Troubleshooting

In addition to the cleaning messages, the display also shows an appropriate
message in case of a technical fault.
WARNING!
When opening a defective unit, there is a danger
of injury.
– Never repair a defective device yourself. In
case of a technical defect, contact SEVERIN
customer service.
Display Cause
The brewing unit
Please
must be cleaned.
clean brew-
ing unit.
The brewing unit is
check brew-
not inserted correctly.
ing unit and
insert.
A system error has
sYstem
occurred.
error.
The bean container is
Please re-
empty.
fill coffee
beans.
Version 3 2014-11
Remedy
Clean the brewing unit (►"8.3
Cleaning the brewing unit").
Insert the brewing unit (►"8.3
Cleaning the brewing unit").
Switch the unit off for several
seconds, then turn it on again.
Disconnect the unit from the
mains for several seconds.
If the problem persists, contact
our customer service.
Fill the bean container with
beans
(►"6.3 Preparing coffee
specialities").
Display Cause
The grind mechanism
is blocked.
The door of the brew-
brewing unit
ing unit is not closed.
door oPen.
After the cover of
rinsing
the brewing unit has
necessarY.
been opened, rinsing
Please
Press becomes necessary.
ok-button.
Remedy
Set the grinder regulator on
the coarsest fineness (►"7.1
Setting the grinding fineness")
and prepare another coffee
speciality.
If this solves the problem, set
the desired fineness again for
the next beverage.
If problem persists, contact
customer service.
Properly close the door of the
brewing unit.
Press OK; rinsing will start
automatically.
59
GB