Velleman DVR4MQA Manuel D'installation page 11

d) CAMERA
Press the MENU button on the front of the device and press ▲or ▼until 'CAMERA' is
selected (cf. figure on the right).
Press ENTER to enter the camera menu. A screen as shown below will be displayed.
1) TITLE
A title can be given to each channel/camera. Initially each title is the channel number.
2) ALARM
Select LOW / OFF / HIGH for alarm polarity. The default value is LOW.
3) REC
Select if the channel has to be recorded or not. When it is set to ON and the alarm is triggered for that channel, it will
be recorded more frequently, e.g. if channel 1 is triggered, the recording sequence will be 1-2-1-3-1-4-...
4) BT (Brightness) / CT (Contrast) / CL (Colour) / HUE
Adjust the brightness, contrast, colour and hue for each channel ; the levels can be set from 0 to 63.
e) Recording Mode
Press the MENU button on the front of the device and press ▲or ▼until 'RECORD' is
selected (cf. figure on the right).
Press ENTER, the following screen will appear:
1) RECORD IPS
Select the number of images per second (IPS).
NTSC : 1, 2, 4, 8, 15, 30 ; PAL: 1, 2, 3, 6, 12, 25
2) QUALITY
Select the recording quality: BEST, HIGH, NORM or BASE.
3) RECORD MODE
Select the recording mode:
Q-FR = quad-frame: all 4 channels simultaneously
Q-FI = quad-field: all 4 channels simultaneously at lower resolution
MUX = multiplex: the 4 channels consecutively
DVR4MQA
(RECORD)
RECORD IPS: 30
RECORD QUALITY: NORMAL
RECORD MODE: FRAME
- 11 -
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT
VELLEMAN