Samsung POWERbot VR2AR72 Série Guide D'utilisation page 35

Symptom
During product registration, the AP
password 1111122222 is not input
correctly.
During product registration, the
password of the connecting wireless
router is not input correctly.
A connection cut between the
SmartThings App and the POWERbot
occurs though the product
registration is completed.
A connection cut between the
SmartThings App and the POWERbot
suddenly occurs during normal
operation of the app.
Controlling with SmartThings App
does not work since the remote
control function is disabled.
1_VR7200_EN_DJ68-00827B-00_AA.indd 34
fPress and hold the "[robot vacuum] Samsung" on the
network list and delete the network to initialize the
password.
fCancel the product registration, run the SmartThings App
again, and try the product registration again.
fPress and hold the wireless router you want to connect on
the network list, and delete the network to initialize the
password.
fRefresh the screen and wait.
fRun the SmartThings App again.
fCheck whether there is an internet connection problem.
Especially, a firewall may interrupt standard operation.
fIf the POWERbot is distant from a wireless router,
connection cut may occur.
fReset the POWERbot and the smartphone, and check the
connection again.
fIf the connection cut occurs repeatedly, try the product
registration again.
fWhen the SSID/password of a wireless router is changed,
try the product registration again.
fRemote control function is disabled status. Make the remote
control function enabled status with a remote controller.
ENGLISH-34
Checklist
2019-03-19 오후 5:25:55