Charging - Samsung POWERbot VR2AR72 Série Guide D'utilisation

Charging

Charge the POWERbot fully before using for the first time. (Refer to the page 35 for the charging
time.)
• Rated input voltage of this product is 100-240 V ~ .
WARNING
1
Turn on the
emergency switch
on the bottom
You must turn on the
emergency switch to turn on
the POWERbot.
1_VR7200_EN_DJ68-00827B-00_AA.indd 12
2
Manually charge
the POWERbot by
placing it on the
docking station
Make sure the charging
pins on the POWERbot
and the docking station
are aligned.
ENGLISH-12
3
Check the
charging status
" " will turn on according to
charging progress and "FULL" will
turn on when charging is complete.
2019-03-19 오후 5:25:24