Information Codes - Samsung NE58K9850 Serie Manuel D'utilisation

Information codes

OVEN
Displayed
Possible cause
Code
This code occurs if the control
C-d0
key is short for 1 minute.
This code occurs if the door lock
C-d1
is mispositioned.
This code occurs if
communication between
C-F0
the Main and Sub PBA is
interrupted.
This code occurs if
C-F2 communication between the
Main and Touch is interrupted.
The oven sensor is open when
the oven is operating.
C-20
The oven sensor is short when
the oven is operating.
This code occurs if the internal
temperature rises abnormally
C-21
high.
The temp probe sensor is short
C-23
when the oven is operating.
The PCB sensor is open when
the oven is operating.
C-30
The PCB sensor is short when
the oven is operating.
NE58K9850WS_AA_DG68-00723A-01_EN.indd 63
Solution
Press OFF, and then restart the
oven. If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power. If
this does not solve the problem,
call for service.
Displayed
Possible cause
Code
This code occurs if the PCB
C-31 temperature rises abnormally
high.
-dC- This code appears if the
partition is inserted or removed
while the oven is operating.
Solution
Call for service
Make sure the partition is
inserted properly, and then
restart the oven.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power. If
this does not solve the problem,
call for service.
English 63
1/30/2016 11:18:02 AM