Wireless Connection; Water Removal; Water Bucket - Danby DDR050BCWDB-ME-6 Manuel Du Propriétaire

OPERATING INSTRUCTIONS
TIMER
The timer can be used to set the dehumidifi er to turn
off or on after a set period of time.
Auto Off
1. When the dehumidifi er is turned on, press the
timer button to activate the auto off timer.
2. Press the humidity adjust buttons to change the
set time in 0.5 hour increments up to 10 hours
and then in 1 hour increments up to 24 hours.
Auto On
1. When the dehumidifi er is turned off, press the
timer button to activate the auto on timer.
2. Press the humidity adjust buttons to change the
set time in 0.5 hour increments up to 10 hours
and then in 1 hour increments up to 24 hours.
The auto on and auto off timers can be used at the
same time by fi rst setting one and then the other.
The timer will not cycle the dehumidifi er on and off
indefi nitely. The auto on and auto off timers will
function one time and then the dehumidifi er will
return to regular functioning.
Turning the dehumidifi er on or off at any time or
changing the timer setting to 0.0 will cancel the
timer settings. The P2 bucket full bucket error code
will also cancel the timer setting.

WIRELESS CONNECTION

This appliance can be controlled with a wireless
application on your wireless device.
Visit https://www.danby.com/support/#apps
to download the application and learn about its
operation.

WATER REMOVAL

1. Water Bucket

The dehumidifi er will automatically collect
condensed water in the water bucket. When the
bucket is full, the compressor and fan will turn off
and the full bucket indicator light will turn on. The
display will show "P2".
To empty the bucket, lift the dehumidifi er handle
and separate the body from the water tank. Put the
dehumidifi er body on a fl at, solid surface. Empty the
bucket but be cautious when moving the bucket, it
will be full and can be heavy.
The dehumidifi er will resume functioning when the
body is reconnected to the water bucket.
6