Adjustment; Important - Christiaan van der Klaauw SUPERNOVA Mode D'emploi

E N G L I S H
Specifications
The following information is
displayed on the Supernova:
hours with luminova;
A
minutes with luminova;
B
seconds;
C
date (day of the week + month);
D
calendar day;
E
the moon phase.
F

Adjustment

The settings of your watch can be
adjusted by using the different
positions of the crown and the
push button .
P
The crown has three positions:
this is the position of the crown
0
when you are wearing the
watch. In this position, you can
wind the watch by hand.
setting the date and the moon
1
phase.
setting the time.
2
To adjust the settings of the
Supernova, pull out the crown to
position . You can now set the
2
time to 12:00. Caution: do not do
this at 24:00. Then push the crown
in by one position to set the date
1
and month by turning the crown
counterclockwise. Set the moon
phase by turning the crown
clockwise.
E N G L I S H

Important

Always set the moon phase to the
previous day. Once this is the case,
use the enclosed accessory to push
in the push button located at the
P
10 o'clock position on the left-hand
side of the watchcase to set the day.
Set this to the previous day as well.
When the correct month is
shown in the window and the day,
date and moon phase are set to the
previous day, then pull out the crown
to position , and then turn the
2
hands clockwise until everything is
set to today. When the hands also
show the right time, then push the
crown in again completely.