Publicité
Les langues disponibles
Les langues disponibles
E N G L I S H
Specifications
The following information is
displayed on the Ceres 1974:
hours;
A
minutes;
B
the moon phase.
C
Adjustment
The settings of your watch can be
adjusted by using the different
positions of the crown and the
push button
.
P
The crown has two positions:
this is the position of the crown
0
when you are wearing the
watch. In this position, you can
wind the watch by hand.
setting the time.
1
Setting the moon phase
To set the moon phase correctly,
use the enclosed accessory to push
in the push button
located at the
P
9 o'clock position on the left-hand
side of the watchcase, so that the
Moon on the watch begins to turn
clockwise.
Setting the time
Pull the crown out carefully to the
furthest position (position
).
1
Now turn the crown to move the
hands forward until the correct
time is displayed. When the hands
show the right time, then push the
crown in again completely.
E N G L I S H
Functionalities
The moon phases are shown
C
at the 6 o'clock position.
When the Moon is shown left
of the centre, the Moon is in the
first quarter. When the image
is in the middle, it is full moon,
and when it is on the right,
the Moon is in the last quarter.
If the image is not visible,
then it is new moon.
Publicité
