Installation - CISA 1.E0000.00.0 Notice D'installation Et D'utilisation

INSTALLATION

Do not modify or open the product otherwise the warranty will be void.
1. The motor must be installed with the deadbolts engaged (1).
2. Align the lock status sensor (4) with the slot on the rod (5) until the correct position for
screwing in the screws is found.
3. Tighten the two fixing screws of the CISA MOTOR with a tightening torque of 1 - 1.3 Nm.
4. Check the mechanical workings of the lock by opening it using the key or handle and
then pressing the door status sensor (3). All the closing parts must engage quickly and
completely. Repeat several times.
1
3
2
1
1
Part no. Description
1
2
3
4
5
5 4
- 23 -
Deadbolt
Latchbolt
Door status sensor
Lock status sensor
Slot for lock status sensor
5
4
IT
EN
FR
ES
DE
GR
RU
PL