Installation; Introduction; Safety Regulations - CISA 1.E0000.00.0 Notice D'installation Et D'utilisation

IT

INTRODUCTION

EN
This manual is an integral part of the product and has been compiled by the manufacturer to
provide everyone authorised to interact with it with the information they may need. Keep this
manual in an easily accessible place for the working life of the product and make sure everyone
knows where it is. The manufacturer reserves the right to make changes to this manual without
prior notice.
FR
The CISA MOTOR can be fitted after the lock has
been installed (wiring and hole where the motor
is to be inserted are needed).
The CISA MOTOR can be installed with accessory
ES
item 1.06120.00.0 ONLY in position I (semi-
automatic function).
Do not use the accessory in position II
(hold open function).
DE

SAFETY REGULATIONS

Read the instructions in the installation and user manual carefully.
All installation and maintenance operations which require precise technical expertise or particular
skills must be carried out exclusively by qualified personnel with the relevant qualifications and
experience in the sector.
GR
The CISA MOTOR is powered by a power supply with 12V DC and 2A output.
For more information, please refer to the section "Power supply characteristics".
Disconnect the system from the mains during installation.
Do NOT perform electric welding on the lock or any parts of the lock when installed
RU
on the door.
If there is a momentary power failure, the lock can be opened with the key only.
If there is a momentary power failure, the lock will always revert to locked when
PL
power is restored.

INSTALLATION

- 22 -
ITEM 1.06120.00.0
0
0
ITEM 1.E0000.00/10. 0