DGXDSDV112 - DigiSender® XDHDMI - Single Input HDMI AV Sender System
Using your DigiSender® XDHDMI
Standard Operation
1.
Switch on the source equipment (Satellite, Free-
view, DVD, VCR, etc.).
3.
Turn on the DigiSender® Receiver by pushing the
Power button on the front of the unit. The Power
Indicator will change from Red to Green to indicate
that the unit is switched on
Please read the instructions carefully prior to installation
2.
Turn on the DigiSender® Transmitter by pushing the
Power button on the front of the unit. The Power
Indicator will change from Red to Green to indicate
that the unit is switched on.
4.
Turn on the receiving TV, and select the HDMI chan-
nel assigned to the HDMI Input that you plugged
the DigiSender® Receiver in to. This may be labelled
as SOURCE, INPUT, AUX, AV, VIDEO, VCR or
ENGLISH (EN)
.
Page 11