Wall Installation, Ceiling Installation - Maico ECA 15 E Notice De Montage Et Mode D'emploi

5. Fit tension relief.
6. Screw the motor cap to the housing using both
fixing screws, see Fig. A
7.2 Wall installation, ceiling installa-
tion
NOTICE Damage to unit/functional problems
in the event of rubbing impeller.
Do not distort or crush housing when installing.
NOTICE Danger of short-circuits/damage to
unit when installing on wall as a result of
build-up of condensation in fan housing.
Thermally insulate ventilation ducts properly.
A
1. Align housing and slide into ventilation duct.
Note the air flow direction: Air extraction (Fig.
A) / ventilation (Fig. D).
2. Air flow direction and rotational direction are
marked on the fan housing by arrows (Pos. P).
E
7 Installation
17