Technical Specifications - Grizzly ERM 1434-3 Stow Traduction De La Notice D'utilisation Originale

• The plastic and metal parts employed
can be separated out and thus recy-
cled use can be implemented. Ask our
Service-Center for details.
• Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.
• Defective units returned to us will be
disposed of for free.
Technical Specifications
Electric Lawnmower
Motor input power
Mains voltage ........... 220 - 240 V~, 50 Hz
Protection class ..................................II
Protection type...................................IPX4
Idling speed ..............................3450 min
Cutting circle ....................................34 cm
Cut height ................................. 25-75 mm
Weight ..............................................13 kg
Lawn bag volume
Sound pressure specification
(L ) ........................84dB(A), K
pA
Noise level specification
guaranteed .............................. 96 dB(A)
measured ......94 dB(A), K
Vibration (a ) ................................ 1.2 m/s
h
The noise and vibration values have been
determined in accordance with the stand-
ards and regulations specified in the decla-
ration of conformity.
Technical and visual modifications may be
made without notice in the course of further
development. All dimensions, informa-
tion and specifications in these operating
instructions are therefore not guaranteed.
As such, no assertion of legal claims can
be enforced on the basis of the operating
instructions.
..ERM 1434-3 Stow
......................... 1400 W
................................33 l
= 3 dB(A)
pA
(L )
WA
=2.36 dB(A)
WA
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
-1
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).
2
GB
67