Assembling A Gas-Cooled Tig Torch; Cooling Unit Fk 2600 / 2601 - Fronius MagicWave 2600 Instructions De Service

Design with Fronius welding torch central connection F:
- Insert welding torch with bayonet connection into the central
connection on the equipment side of the welding torch
lock in place by turning to the right
- Insert control plug in the socket
- Connect water connections to the connection pieces on the
water feed and water return
Important! Please see your torch's instruction manual for techni-
cal details on the torch and for information on torch assembly, care
and maintenance.

ASSEMBLING A GAS-COOLED TIG TORCH

Gas and current
connection
Fig.10b Design with central burner connection GWZ: Torch connection gas-
cooled
Gas and current
connection
Fig.10c Design with Fronius central welding torch connection F: Torch connection
gas-cooled
Design with central burner connection GWZ:
- Mount the gas adapter (44,0001,0785)
- Pull back the rubber sleeve from the rear of the torch
- Screw the hexagon nut (width across = 21) of the gas+current
connection onto the torch connector point on the machine
and tighten firmly
- Push the rubber sleeve back over the hexagon nut
- Plug the control plug into socket
Important! Please see your torch's instruction manual for techni-
cal details on the torch and for information on torch assembly, care
and maintenance.
Design with Fronius central welding torch connection F:
- Insert welding torch bayonet connection in the central connec-
tion on the equipment side of the welding torch
place by turning to the right
- Insert control plug in the socket
Important! Please see your torch's instruction manual for techni-
cal details on the torch and for information on torch assembly, care
and maintenance.
and
and lock
Control plug
Control lead
Hose sleeve
Control plug
Control lead
Hose sleeve
and latch it
and lock in
and lock in place

COOLING UNIT FK 2600 / 2601

Important! Please see your operating instructions FK 2600 / 2601
(article no.: 42,0410,0490) for information on MOUNTING and
START-UP.
10