Operating Instructions - Walter Surface Technologies BIO-CIRCLE COMPACT-S 350 Manuel De L'utilisateur

Operating Instructions

The bio-CirCle
®
bioremediation of biodegradable oil and grease from ferrous and non-
ferrous parts and other washable surfaces. It is NOT recommended for
cleaning other non-biodegradable substances.
do not introduCe disinfeCtants, solVents, braKe fluid,
engine Coolant, Chlorinated, aCidiC or alKaline solutions
or any Cleaning solution other than bio-Circle aero™, bio-
Circle l™ or bio-Circle ultra™ into this system. do not add
Water.
1. Place parts to be cleaned into sink (G). Maximum load capacity is
100 kg/220 lbs. Do not plug drain to fill cleaning sink. Use optional
Parts Washing Basket (55-B 087) to contain small parts.
Note: Any parts susceptible to oxidation should not be left in the
sink after cleaning.
2. Position 3-way Control Valve (B) toward desired direction of solution
flow.
Solution can flow through both the flexible faucet (A) and the flow-
through brush (C) simultaneously when the handle is positioned mid-
way between the two.
Parts Cleaning System is designed for the removal and
Compact-S Model 350 - Parts Cleaning System
9