Inserting And Removing Burs - Dentsply Sirona Midwest Stylus Plus Notice D'utilisation

5 Operation
38
5.3

Inserting and removing burs

IMPORTANT: Check the push button to make sure it moves freely!
NOTE! Use only burs and diamond polishers that are sharp and
undamaged. Use clean burs and diamond polishers to avoid dirt in
the clamping system.
CAUTION! A loose or partially removed bur can detach itself
from the head or break off. This may cause injury! Therefore, use
the high-speed handpiece only if the bur is inserted at least 10 mm
and is clamped securely in place.
Operating instructions Midwest Stylus Plus / Midwest Tradition
67 27 148 D3673.201.09.01.02