Inserting And Removing Burs - Dentsply Sirona Midwest E Pro Notice D'utilisation

®
Operating Instructions Midwest E Pro / Midwest
66 04 206 D3686.201.01.04.02
® ®
E Plus / Midwest E mini
5.2

Inserting and removing burs

IMPORTANT: Check the push button to make sure it moves freely!
NOTICE! Use only burs and diamond polishers that are sharp and
undamaged. Use clean burs and diamond polishers to avoid dirt in the
clamping system.
CAUTION! A loose or partially removed bur instrument can come
loose from the head or break off. Risk of injury! Therefore the instrument
must only be used when the bur instrument is securely clamped at least
10 mm deep.
CAUTION! The handpiece must only be operated with the clamping
system closed.
5 Operation
39