Preparation; Initial Start-Up And Longer Breaks In Use; Prior To Starting The Work Day - Dentsply Sirona Midwest Stylus Plus Notice D'utilisation

Operating instructions Midwest Stylus Plus / Midwest Tradition
67 27 148 D3673.201.09.01.02
4

Preparation

4.1

Initial start-up and longer breaks in use

ü
The high-speed handpiece can reach full power only if
specified operating pressures are set [→ 22]. If necessary,
have the pressures checked by a service technician with a star
tester that is placed between the supply hose and the quick
coupling.
➢ Sterilize the high-speed handpiece and accessory parts prior to
startup [→ 54].
NOTE! Never sterilize the quick coupling.
➢
Clean and lubricate the high-speed handpiece after longer
breaks in use.
4.2

Prior to starting the work day

➢
Purge the water and air channels for 30 seconds.
4 Preparation
31