Rear Shock Absorber Adjustment - Yamaha WARRIOR YFM350XP 2001 Manuel Du Propriétaire

1. Adjusting ring
a. Increase spring preload
b. Decrease spring preload
1. Anneau de réglage
a. Augmente la précontrainte du ressort.
b. Diminue la précontrainte du ressort.
1. Anillo de ajuste
a. Aumenta la precarga del muelle
b. Reducir la precarga del muelle

Rear shock absorber adjustment

The spring preload and damping force of the rear
shock absorber can be adjusted to suit the rider's
weight and riding conditions.
_
This shock absorber contains highly pressur-
ized nitrogen gas. Read and understand the
following information before handling the
shock absorber.
2. Locknut
2. Contre-écrou
2. Contratuerca
_
Adjust spring preload as follows:
4-31
WARNING
1. Do not tamper with or attempt to open the
cylinder assembly.
2. Do not subject the shock absorber to an
open flame or other high heat source.
This may cause the unit to explode due to
excessive gas pressure.
3. Do not deform or damage the cylinder in
any way. Cylinder damage will result in
poor damping performance.
4. Take the shock absorber to a Yamaha
dealer for any service.
1. Loosen the locknut.
2. Turn the adjusting ring in direction a to in-
crease the spring preload and in direction b
to decrease the spring preload.
EBU00743*