Bosch SHE66C Guide D'entretien Et D'utilisation page 8

Preparing and Loading the Dishware
12 place setting
Top Rack Accessories
Model
Number
Top Rack
yes yes
Flip Tines
RACKMATIC
TM
Automatic
yes no
Height
Adjustment
Manual
no yes
Height
Adjustment
yes yes
Cup Shelves
yes no
Knife Rack
Top Rack Flip Tines
Flip Tines fold down to make loading the racks
easier in some instances.
Grasp the
tines as shown
in Figure
3 and fold
the tines
downward.
When the
top rack is
loaded, push
it into the
dishwasher.
NOTE: When pushing the top rack into the
dishwasher, push it until it stops against the back
of the tub so the top rack spray arm will connect
to the water supply. Do not push the top rack with
the door.
6
Figure 2
yes yes yes yes
no yes yes yes
yes no no no
yes yes yes yes
no yes yes no
Figure 3
RACKMATIC™ Top Rack Height Adjustment
The top rack can be lowered to accommodate
large items in the top rack, and raised to make
room for large items in the bottom rack.
To lower the top rack:
1. Pull the top rack out of the dishwasher until it
stops rolling.
2. Press the RACKMATIC™ handles inward as
shown in Figure 4
and let the
rack drop.
To raise the top
rack:
1. Pull the top
rack out of the
dishwasher until
it stops rolling.
2. Grasp the top
of the rack
above the
RACKMATIC™
yes handles and
pull it upward
as shown
yes
in Figure
5 until the
RACKMATIC™
handles lock
no
the rack
into position (you do not need to press the
yes
RACKMATIC™ handles in order raise the
rack).
yes
NOTE: Before you push the top rack back into
the dishwasher, ensure that the rack height
is the same on both sides. Otherwise, the
dishwasher door will not shut and the top rack
spray arm will not connect to the water circuit.
3. Push the top rack back into the dishwasher.
Manual Top Rack Height Adjustment
Remove the empty upper rack by pulling it out of
the dishwasher to the point that it can be lifted
upward, as shown in Figure 6.
Pull the rack outward and up until the rollers are
completely free of the roller guides.
Re-insert the rack with the other set of rollers on
the roller guides, as shown in Figure 7.
Figure 6
(continued)
Figure 5
Figure 7
Figure 4