emerio FN-112031 Mode D'emploi page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
OPERATING INSTRUCTIONS
1.
Plug the power cord into a suitable socket.
2.
Oscillation: To make the fan head oscillate, push down the oscillation knob (8). To stop the fan head from
oscillating, pull up the oscillation knob.
3.
The fan is switched on and off by pressing the speed control buttons, i.e. 0 = Off, 1 = Low air flow speed, 2 =
Medium air flow speed, 3 = High air flow speed.
4.
If the timer (9) has been set, the fan will automatically stop to the time you have set but within 120 minutes the
maximum. To operate this timer, please turn the timer switch clockwise to the desired timing position.
5.
Tilting Angles: By pushing the fan-guard, you can adjust the fan to the preferred elevation.
NOTE: When the timer is at the "OFF" position, the fan will not run no matter which speed control button you
press.
CAUTION: Press only one of the speed control buttons at a time. Permanent damage to the switch housing may
result if two or more of the buttons are pressed simultaneously.
CLEANING
Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains
cable from the socket.
Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and dry it carefully. Always take out the mains plug first.
Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it
occasionally using a dry brush or vacuum cleaner.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50/60Hz
Power consumption: 55W
Eco design requirements
Product information requirements
Maximum fan flow rate (F)
Fan power input (P)
Service value (SV)
Measurement standard for service value
Standby power consumption (PSB)
Fan sound power level (LWA)
Maximum air velocity (c)
Contact details for obtaining more information
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal rights,
the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a
defective product, you can directly go back to the point of purchase.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs
62 m³ /min
55 W
1,127 (m³ /min)/W
IEC 60879: 1986 (corr.1992)
--
67 dB(A)
3,5 meters/sec
Emerio Deutschland GmbH
Höfferweg 14
51519 Odenthal
Germany
- 5 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fn-112031.1

Table des Matières