Disconnecting The Cables; Removing The Mounting Frame; Removing The Protective Maintenance Plate - DURAVIT DuraSystem WD5003 Notice D'utilisation

1
1
2

Disconnecting the cables

> Disconnect the cables connected to the
actuator plate.
> Set the plate aside.

Removing the mounting frame

> Loosen the screws.
> Remove the frame.
> Loosen the spacer bolts and set
1
them aside.
2
Removing the protective maintenance
plate
> Press the fixing hooks inwards.
1
> Carefully remove the plate.
> Turn the plate to the side.
51