Inserting The Protective Maintenance Plate; Installing The Mounting Frame; Connecting The Cables To The Actuator Plate - DURAVIT DuraSystem WD5003 Notice D'utilisation

+ -
6,0 V
1
54
24 VDC
4
5
3
2
Inserting the protective maintenance
plate
> Re-insert the plate.
> Remove the threaded bar.
> Insert the spacer bolts and secure them
by turning them slightly to the right.

Installing the mounting frame

> Mount the frame.
> Secure the frame in place.
Connecting the cables to the actuator
plate
> Connect the cables to the corresponding
connections on the actuator plate.