Push Buttons - Vortice REG FILTER Notice D'emploi Et D'entretien

REG FILTER
Purifier control with fan EC 0... 10V
Please read this instruction manual carefully before using the product.

PUSH BUTTONS

The regulator has 4 buttons: ON / OFF, MODE, UP and DOWN.
Note: If the backlight is off, the first press (on any button) turns the backlight on. With the backlight on, the functions of the
buttons are as described below. The backlight automatically turns off after 2 minutes without pressing.
Basic functions:
ON / OFF:
Short press: Selects the regulator on / off status. Manual mode.
Long press (approx 1s): Activates and deactivates the time programming.
Schedule off: Manual mode
Schedule activated: Schedule mode.
MODE:
Short press: Display of operating times (filters G4 and H14).
Long press (2s approx): Access the user menu:
Date setting (HOrA)
Schedule Settings (PrOG)
Identifier display (id)
Parameter mode (PAr)
Reset of filter operating time G4 (r g4)
Reset del tiempo de funcionamiento filtro H14 (r h 14)
Regulator reset (rESET).
GO UP:
Short / long press: Increase the speed setpoint (0% ... 100%).
GO DOWN:
Short / long press: Decrease the speed setpoint (100% ... 0%).
Note: If MODE + UP is pressed continuously when powering the regulator, or after a reset, it returns to the values default
(showing on screen dEFEC).
User Menu:
- User Menu: With UP and DOWN you select the mode to access. To enter the selected mode, press MODE. To exit press ON /
OFF.
- Date setting (HOrA): With MODE the data to be modified (day / time) is selected and with UP and DOWN the value is
modified. ON / OFF exits the date setting and returns to normal operating mode.
21