Residual Risks; Know Your Product; Symbols On The Product - Ryobi RY18BLXA Traduction Des Instructions Originales

make sure that all moving parts have come
to a complete stop.
■ Remove the blower tubes to inspect for
blockage. Clear the tubes if required.
■ Reinstall the blower tubes before starting
the product.

RESIDUAL RISKS

Even when the product is used as prescribed,
it is still impossible to completely eliminate
certain residual risk factors. The following
hazards may arise during use, and the
operator should pay special attention to avoid
the following:
■ injury caused by vibration
– Always use the right tool for the job, hold
the product by the designated handles
and use the lowest speed necessary to
achieve the task.
■ injury caused by exposure to noise
– Wear ear protection and limit exposure.
■ injury caused by flying objects from the
blow tube airflow
– Wear eye protection at all times.
RISK REDUCTION
It has been reported that vibrations from
handheld tools may contribute to a condition
called Raynaud's Syndrome. Symptoms may
include tingling, numbness, and blanching of
the fi ngers, usually apparent upon exposure to
cold. Hereditary factors, exposure to cold and
dampness, diet, smoking, and work practices
are all thought to contribute to the development
of the these symptoms. There are measures
that can be taken by the operator to possibly
reduce the effects of vibration:
■ Keep your body warm in cold weather.
When operating the product, wear gloves
to keep the hands and wrists warm. It is
reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to
increase blood circulation.
■ Take frequent work breaks. Limit the
amount of exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and
see your physician.
4 | English
WARNING
Injuries may be caused or aggravated by
prolonged use of a tool. When using any
tool for prolonged periods, ensure you take
regular breaks.

KNOW YOUR PRODUCT

See page 139.
1. Blower tube
2. Tube latch
3. Trigger
4. Turbo button
5. Cruise control lever
6. Handle
7. Charger
8. Battery latch button
9. Battery pack
10. Speed nozzle
NOTE: For RY18BLXA, the battery and
charger are sold separately.

SYMBOLS ON THE PRODUCT

Safety alert
Read and understand
all instructions before
operating the product. Follow
all warnings and safety
instructions.
Do not expose the product to
rain or damp conditions.
Wear ear protection.
Wear eye protection.
The guaranteed sound power
104
level is 104 dB.
Remove the battery pack
before starting any work on
the product.