Oase biOrb MCR LED Mode D'emploi page 17

OPERATION
How to proceed:
 D
• Pull out the small plastic strip before using the
remote control for the first time.
• Switch on the lighting unit with the ON/OFF
switch.
Switches on the light.
Switches off the light.
Start of the cycle through the possi-
ble light colours.
End of the cycle through the possible
light colours.
Switches the LED to the basic colour
red (R). Green (G), blue (B) respec-
tively, or colours other than these 3
basic colours. 15 predefined colours.
White light ("Daylight"", W)
Dims the light, 4 brightness stages:
80 % ... 20 %. To reset to 100 % press
any button for selecting the light col-
our.
One of the 4 buttons for activating
the cycle function.
Cycle function
Example for the 8 HR cycle. When the 10, 12 or
14 HR button is selected, the time for "Daylight"
and "Night light" changes accordingly. "Day
light"is always reduced by 30 minutes for "Sun-
rise" and "Sunset". Total duration of a cycle:
24 h.
Mode
Sunrise
Daylight
Sunset
Nightlight
- EN -
Time
15 min
7.5 h
15 min
16 h
17