Door Reversal; Building-In - De Dietrich DRS 922 JE Guide D'installation & D'utilisation

Door reversal

The appliance is supplied with the door
opening to the right.
For door opening in the opposite direction,
perform the following actions prior to
installation
1. Unscrew the upper pin and remove the spacer
2. Remove the door.
3. Unscrew with a key the lower pin and replace it
on the opposite side.
4. Reinsert the door, refit the spacer and rescrew
on the opposite side.
the upper pin

Building-in

Dimensions of the recess
Height of housing (1)
Depth of housing (2)
Width of housing (3)
PR0
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
1225 mm
550 mm
560 mm
3
1
2
23