Changing The Batteries; Care And Storage; In The Event Of Problems - Beurer JBY 84 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
high up as possible near a door or win-
dow and ensuring that the batteries are
not too weak.
Other radio waves can interfere with the
transmission of the baby monitor. There-
fore, do not position the baby monitor
near devices such as microwaves, WLAN
etc. The following other factors can inter-
fere with the baby monitor's transmis-
sion or shorten its range: Furniture, walls,
houses, trees, environmental factors (such
as fog, rain).

9. Changing the batteries

The devices have a battery level indicator
in the display. If the batteries are too weak,
the devices switch off automatically and
you should change the batteries.
Note
When changing the batteries, use batter-
ies of the same type, make and capacity.
Always change all batteries at the same
time. Use batteries free from heavy metals.

10. Care and storage

The service life of the device depends on
its careful handling:
CAUTION
Remove the batteries if the devic
in use for an extended period.
Protect the devices from knocks,
dust, chemicals, drastic changes in tem-
perature, electromagnetic fields and
nearby sources of heat (ovens, heaters).
After use, before cleaning and ch
ing any accessory parts, the power unit
should always be disconnected.
If dirty, wipe the device with a so
cloth.
Clean the devices with a dry clot
Do not use any abrasive cleaning
ucts.

11. In the event of problems

Faults
Action
Displays do
Check whether
not illuminate
after switching
on.
21
the relevant adapter p
perly plugged in,
the batteries are charg
too weak,
the batteries have bee
rectly inserted.

Publicité

Table des Matières
loading

Table des Matières