Saw Chain Tension Adjustment; Important - Remington 107624-01 Manuel D'utilisation Et D'entretien

ASSEMBLY
Continued
Chain Tensioning Screw
Figure 5 -Turn ChainTensioning Screw on Model
107624-01, -02
Adjustment Block
E-Ring
Figure 6 -Turn ChainTensioning Knob on Model
107625-01, -02, 111174-01
SAW CHAIN TENSION
ADJUSTMENT
WARNING: Unplug chain saw from
power source before adjusting saw chain
tension.
WARNING: Cutting edges on chain
are sharp. Use protective gloves when
handling chain.
WARNING:Maintain proper chain ten-
sion always. A loose chain will increase
the risk of kickback. A loose chain may
jump out of guide bar groove. This may
injure operator and damage chain. A
loose chain will cause chain, guide bar,
and sprocket to wear rapidly.

IMPORTANT!

Failure to follow these instructions when tensioning
saw chain will damage saw and void the warranty. For
additional information call 1-800-858-8501.
New saw chains will stretch. Check chain tension
frequently when first used and tighten when chain
becomes loose around guide bar.
www.desatech.com
Adjustment
Block
Chain Tensioning
Knob
If chain becomes loose around guide
bar, allow chain to cool then...
Loosen both nuts...
Turnchaintensioningscrewclockwise
to tension saw chain or...
8
Models 107624-01
and 107624-02
107705