Beurer HS 20 Mode D'emploi page 28

WARNING
To avoid damage to health, please note the
following:
• Ensure that no highly flammable liquids are located
near the device. Risk of fire!
• Place the device on non-flammable surfaces only.
Risk of fire!
• The device must not be covered – risk of fire!
• Do not use the device on synthetic hair – risk of fire!
Note
• Remove all packaging material before using the
device.
• To charge, only connect the device to a socket that
has the voltage shown on the type plate.
• Only remove the mini USB charging cable from the
socket by the mini USB adapter.
• Do not use any additional parts that are not
recommended by the manufacturer or offered as
equipment.
• Under no circumstances should you open or repair the
device yourself, as faultless functionality can no longer
be guaranteed thereafter. Failure to comply with this
instruction will void the warranty.
• In the event of a fault or damage, have the device
repaired by a certified specialist workshop.
• Never leave the device unattended during use.
• Do not use the device outdoors.
• If you pass on the device to someone else, make sure
to also pass on these instructions for use.
28