Electrolux ERN19510 Notice D'utilisation page 52

52 electrolux
Fasten the appliance with 4 screws
provided in the kit included with the
appliance.
Apply the sealing strip pushing it
between the refrigerator and the
adjacent cabinet.
From the plastic cover (E), which is
used to cover the hinge with the pivot
pin, you must take away the part as
indicated in the drawing.
This operation is made easer since
there is, in the internal part of the cover
hinge lid a groove that facilates the
removal of this coomponent.
"Remove the part marked with DX, if
the pivot pin is inserted in the right
hinge, SX in opposite case."
D724
I
I