Cleaning The Interior; Operation; Temperature Regulation - Electrolux ERN19510 Notice D'utilisation

44 electrolux
USE

Cleaning the interior

Before using the appliance for the first
time, wash the interior and all internal
accessories with luke-warm water and
some neutral soap so as to remove
the typical smell of a brand-new
product, then dry thoroughly.

Operation

Insert the plug into the wall socket.
Open the refrigerator door and turn
the thermostat knob, clockwise,
beyond the «O» (STOP) position. The
appliance will start to operate.
To stop operation, simply turn the
thermostat knob to position «O»

Temperature regulation

The temperature is automatically
regulated and can be increased to
achieve a higher temperature
(warmer) by rotating the thermostat
knob toward lower settings or
reduced (colder) rotating the knob
towards higher settings.
However, the exact setting should be
chosen keeping in mind that the
temperature inside the refrigerator
depends on:
• room temperature;
• how often the door is opened;
• the quantity of food stored;
• location of appliance.
A medium setting is generally the
most suitable.
Do n n ot u u se d d etergents o o r
abrasive p p owders, a a s t t hese w w ill
damage t t he f f inish.
Important
If the ambient temperature is high or
the appliance is fully loaded, and the
appliance is set to the lowest
temperatures, it may run continuously
causing frost to form on the rear wall.
In this case the dial must be set to a
higher temperature to allow automatic
defrosting and therefore reduced
energy consumption.