Nice ERA TIME Instructions Et Avertissements Pour L'installation Et L'utilisation page 4

PROCEDURE 1 - Making the BASIC SETTINGS after powering up the transmitter
Step 1
example:
set the HOUR
Step 4
example:
set the YEAR
(2)
Step 7
- end
(5)
example:
set the LOCATION
(4)
2.2 - Memorizing the transmitter in the automations' receivers
To use the transmitter, it must first be memorized in the memory of the automation/s you wish to control with it.
• To memorize the transmitter, run Procedure 2, if no transmitters have yet been memorized in the automation in question, or Procedure 3, if one or more transmitters have
already been memorized.
• When running the procedure, you must select a group (i.e. the transmission channel) to which the automation in question is assigned; we recommend reading Chap-
ter 1 carefully before starting.
• Repeat the procedure for each automation you will be controlling with the transmitter.
Caution • Since the transmitter will be memorized by all receivers in the transmitters range, before starting the procedure shut off power to any motors and receivers you do
not wish to memorize the transmitter. • All memorization sequences are timed, i.e.they must be completed within the indicated time limits.
3 – English
Step 2
example:
ok
confirm set the MINUTES
Step 5
ok
set the MONTH (number)
confirm
NOTES:
(1) - Su = Sunday; Mo = Monday; Tu = Tuesday; We = Wednesday; Th = Thursday;
Fr = Friday; Sa = Saturday.
ok
(2) - Range: 2014 to 2059.
(3) - January = 01; February = 02; March = 03; (.....); December = 12.
(4) - Refer to Table D to select the location closest to you. Then enter the code for the
location in question in Step 7.
confirm
(5) - When you complete Step 7, the main screen displays (see Chapter 4).
Step 3
ok
confirm
example: ok
(3) confirm
example: Friday
Su Mo Tu We Th Fr Sa
set DAY (name)
(1)
Step 6
example:
set DAY (number)
ok
confirm
ok
confirm