Nice ERA TIME Instructions Et Avertissements Pour L'installation Et L'utilisation page 11

... Step 11
sel • fast flashing
• slow flashing
several times ...... ....... to select / deselect the function
... Step 12
sel • fast flashing
• slow flashing
several times ...... ....... to select / deselect the function
... Step 13 Step 14
ok
confirm (9) (display = set values)
NOTES:
(1) - The following days are available: Su = Sunday; Mo = Monday; Tu = Tuesday; We = Wednesday; Th = Thursday; Fr = Friday; Sa = Saturday. To add other DAYS to the
first one, repeat Step 7 for each day you wish to add.
(2) - To add other GROUPS to the first one, repeat Step 8 for each group you wish to add.
(3) - If no climate sensor is connected to the group (or groups) of automated systems involved in the programming of this event or if you want to ignore the existing climate
sensors, select the option with the flashing ON and OFF symbols (= ignore sensors).
(4) - Caution! – if you wish to activate the special "on vacation" function you need to set its parameters first, using Procedure 4.
(5) - Caution! – if you wish to activate the special "planetary time" function you need to set its parameters first, using Procedure 5.
(6) - The system only displays Step 13 if you have enabled the special "partial manoeuvre" function in Step 12.
(7) - Time of the Partial Manoeuvre.
(8) - Set the (required) time between sending the manoeuvre and the time when the automated system blocks the movement of the shutter or awning so as to obtain their
partial opening/closing.
(9) - If, when you press "ok", the system flashes "Err1", this means that the memory is full (100 events already memorized) and the new event cannot be memorized.
(10) - When you press "OK", the system memorizes the new event and "NEW" starts flashing again on the display (Step 15) to show that the transmitter is ready for you to
programme a new event. To program a new event, repeat Procedure 6 from Step 4 onwards, otherwise, to quit programming mode and return to the main screen,
execute Step 16.
= function selected
(5)
= function deselected
= function selected
= function deselected
Step 15
ok
Prog
NEWU
confirm (10) (display)
Step 12 ...
ok
confirm PARTIAL MANOEUVRE
Step 13 ...
(6)
ok
confirm TIME Part. Man.
(7)
Step 16 - end
stop/esc
several times ...
slow flashing
example:
select the TIME Part. Man.
main
screen
Auto
(display)
English – 10
(8)