Receiving - Sony HWS-BTA2W Mode D'emploi

Receiving

Check the following before operating the unit.
– The TX/RX switch is set to "RX."
– The BLUETOOTH stereo audio source device's BLUETOOTH function is on.
– Pairing of this unit and the BLUETOOTH stereo audio source device is complete.
1
Press the 1 button to turn on this unit.
2
Turn on the stereo audio output device connected to this unit, and
select the auxiliary input.
3
Start the BLUETOOTH connection from the BLUETOOTH stereo audio
source device.
4
Start playing on the BLUETOOTH stereo audio source device.
Note
Turn off the bass boost function or equalizer function. If these functions are on, sound may be
distorted.
Note
In the following cases, you need to make the BLUETOOTH connection again.
– The power of this unit does not turn on.
– The power of the BLUETOOTH stereo audio source device does not turn on, or the BLUETOOTH
function is off.
– The BLUETOOTH function of this unit or the BLUETOOTH stereo audio source device is in sleep
mode.
– The BLUETOOTH connection is not made.
To finish receiving
Terminate the BLUETOOTH connection by any of the operations below.
– Operate the BLUETOOTH stereo audio source device to terminate the connection. For details, refer to
the operating instructions supplied with the device.
– Turn off the BLUETOOTH stereo audio source device.
– Turn off this unit.
14
US