Using As A Receiver; Preparation - Sony HWS-BTA2W Mode D'emploi

OPERATING THE UNIT

Using as a Receiver

Used as a receiver, this unit receives music transmitted from a BLUETOOTH stereo audio
source device.
Example
BLUETOOTH mobile phone or
other BLUETOOTH stereo
audio source device
Note
For details on how to operate the devices to be connected, refer to the operating instructions supplied
with each device.

Preparation

1
Connect the LINE IN jack of a stereo audio output device to the LINE
OUT jack of this unit with the supplied connecting cable.
This unit
Tip
When connecting this unit to the phono jack of another device, use the connecting cable RK-G129
(optional).
2
Connect the supplied AC power adaptor to the DC IN 4.5 V jack on
this unit.
To AC outlet
AC power adaptor
(supplied)
3
Set the TX/RX switch to "RX."
This unit
To LINE OUT
jack
LINE OUT
Connecting cable
(supplied)
To DC IN
4.5 V jack
Stereo audio
output device
To LINE IN
jack
RX
TX
Stereo audio
output device
This unit
11
US