Samsung POWERbot SR1M70 Série Mode D'emploi page 39

1_VR7000_EN_DJ68-00763K-08_SW.indd 38
Troubleshooting
Symptom
A connection cut between
the Samsung Connect App
and the POWERbot suddenly
occurs during normal
operation of the app.
Controlling with Samsung
Connect App does not work
since the remote control
function is disabled.
fIf the POWERbot is distant from a wireless router, connection cut
may occur.
fReset the POWERbot and the smart phone, and check the
connection again.
fIf the connection cut occurs repeatedly, try the product
registration again.
fWhen the SSID/password of a wireless router is changed, try the
product registration again.
fRemote control function is disabled status. Make the remote
control function enabled status with a remote controller.
ENGLISH-38
Checklist
2017-12-01 오후 5:07:18